| Gunsmithing |
|
| Install new Bolt Handle |
$300.00 |
| Bolt Handle Only |
$125.00 |
| Bolt Knob Checkering (Per Panel) |
$100.00 |
| |
|
Barrel Services
|
| Barrel Installation: |
|
M 98
|
$200.00 |
| M-70 |
$275.00 |
| Rem 700 |
$250.00 |
| Barrel with Integral Sights |
$600.00 |
| |
|
| Fit & Solder Rear Sight Ramp |
$250.00 |
| Fit & Solder Banded Rear Sight Ramp |
$440.00 |
| Fit & Solder Banded Front Sight Ramp (Parts Included) |
$360.00 |
Fit & Solder Barrel-Banded Swivel
(Parts Included) |
$220.00 |
| |
|
| Thread & Chamber Barrel |
$350.00 |
| Integral Quarter Rib |
$1250.00 |
| Finish & Polish Integral Component Bbl. |
$450.00 |
| |
|
Barrels |
| Integral Q-rib barrel |
$1125.00 |
| Integral sling swivel |
$200.00 |
| Integral front ramp |
$250.00 |
| Finish & Polish Integral component barrel |
$350.00 |
| |
|
| Barrel Blanks (round) |
P.O.R. |
(Kreiger, Lothar-Walther, Pedersen& others available on request.) |
|
| |
|
Stock Services
|
| "Best" Grade walnut stock + cost of blank |
$4500.00 |
Synthetic Stock (Stock Included)
(bedded, installed & finished)
(McMillan, MPI, Bansner - others on request) |
$1300.00 |
| Inletted rear swivel |
$250.00 |
| |
|
Metal Finish
|
| Polish round barrel to 320grit finish |
$300.00 |
| Polish
integral barrel 320gt finish |
$475.00 |
| Rust blue gun |
$525.00 |
| Hot blue gun |
$350.00 |
| |
|
Action Services M98 & M70
|
| Surface Grind Mauser Action, Polish Inside of Action & Polish Bolt |
$300.00 |
| Feed & Function |
$350.00 |
Satterlee Arms 1-piece bottom metal
cartridge- specific
|
$725.00 |
| |
|
| Total Package Upgrade: (Details Below) |
$2,200.00 |
 |
| > Surface Grind
surface grind front and rear bridges |
|
| > Charger Hump Removed |
|
| > Re-machine barrel threads concentric to bore |
|
| > Face turn inner c-ring and front of action |
|
| > Blind rear guard screw hole |
|
| > Receiver re-heat treatment |
|
| > Blind Rear Guard Screw Hole |
|
| > Lap bolt lugs and bolt face |
|
| > Drill and tap 8x40 or 6x48 (choice) |
|
| > Custom bases (coming) |
|
| > Custom bolt stop thumbpad |
|
| > Bolt handle ( customer gets 2 panel checkering as std choice) |
|
| > Satterlee Arms 3 position safety |
|
| >
Timney trigger or other upon request |
|
| >
New guard screws (slotted) |
|
| >
Referbish '09 Argentine bottom metal with new floorplate and release lever |
|
| >
All standard calibers 7x57 thru 30-06 |
|
| Total Package Price |
$2,200.00 |
| |
|
| |
|
| Total Upgrade for Standard Length Magnums (300, 338, etc...) |
$2,800.00 |
| >
includes New Satterlee Arms bottom metal 3 or 4 round (customer's choice) |
|
| |
|
| Total Upgrade for Long Magnum Action (300 H&H, 375 H&H, 416 Rem, 404, etc..) |
$3,200.00 |
| >
Includes New Satterlee Arms bottom metal. |
|
| |
|
Options: |
|
| > Re-Heat Treat When Necessary |
$150.00 |
| > Open Bolt Face |
$75.00 |
| > Open Action to 375 |
$700.00 |
| > Custom Scope Bases Start At: |
$350.00 |
| |
|
| |
|
| Surface Grind Mauser Action, Polish Inside of Action & Polish Bolt |
$300.00 |
| Feed & Function |
$350.00 |
Satterlee Arms 1-piece bottom metal
cartridge-
specific
|
$725.00 |
|
|
| Install 3-Position Safety |
$325.00
|
| 2nd Safety |
$300.00 |
| Satterlee Arms Safeties |
$250.00 |
| |
|
| Satterlee Arms Action Specifications |
|
| All Satterlee Actions are fully finished and function tuned. They are ready for final polish, barreling and stocking. |
| |
| > Standard Action 8.0" Guard Screw Spacing |
| 1) Small Ring Standard, 1.30" Diameter |
| > Suitable for: 30-06, 300 Win Mag, 338 Win Mag, etc... |
| > 3.430" Magazine Length, Capacity = 4+1 |
| |
| 2) Small Ring Magnum, 1.30" Diameter |
| > Suitable for: 375 H&H, 416 Rem Mag, 458 Lott, etc... |
| > 3.430" Magazine Length, STD Magazine |
| |
| 3) Large Ring STD, 1.40" Diameter |
| > Suitable for: 30-06, 300 Win Mag, 338 Win Mag, etc... |
| > 3.430" Magazine Length, STD Magazine |
| |
| 4) Large Ring STD Magnum, 1.40" Diameter |
| > Suitable for: 375 H&H, 416 Rem Mag, 458 Lott, etc... |
| > 3.620 Magazine Length, 4+1 Magazine |
| |
8.25" Guard Screw Spacing |
| .700" Bolt | Long Magnum Action | 1.40" Diameter, 416 Rigby, 450 Rigby, 3.810" Magazine Length |
| |
| .750" Long Magnum Action | 1.460" Diameter, 416 Rigby, 450 Rigby |
| |
| .750" Extra Long Magnum Action | 1.460" Diameter, 505 Gibbs, 8.375" Guard Screw Spacing |
| |
Terms: A 50% deposit is due with all rifle, action or custom parts orders. Deposits are contractual
commitments
and are non-refundable. The balance of payment is due when the work or product is complete. Products or services not paid in full within 60-days of notification of completion will be deemed abandoned, and all deposits and rights of ownership will be surrendered to Satterlee Arms.
Changes to orders can only be made prior to us
beginning
work. After we start machining an action or parts to the specifications of the original order, we can not make changes to that order. |
| |
|
